Clover Sport supports scanning items in both Register and Kiosk modes. Items that have SKUs can be scanned and added to the cart. This article will explain how to add a Scanner.
Connect Scanner
Most supported scanners arrive pre-configured to work with Clover Sport. Plug the USB end of the scanner into the Clover Station hub.
Configuring Scanner
Some Scanners might need to be pre-configured. If you do not see the below image when plugging in your scanner, you can skip to the next step.
Scan the barcodes in order (you might have to cover the other barcode with your hand), then tap Continue.
On rare occasions, some venues will need advanced configuration. Do NOT scan these bar codes and exit the screen by tapping Done. (If your business does need an advanced scanner configuration, contact our Help Center)
Set Default
When plugging in the Scanner for the first time, you will see an Android settings message. Check the box for Use by default for this USB device.
To confirm the Scanner is recognized, you can visit the Devices page by tapping on the additional options Menu on the register screen, and from the additional options Menu, tap Devices.
A green confirmation message will appear in the top right corner of the screen when you plug in the Scanner. On the scanners page, you will see all connected scanners listed.